The Yamaha AN1x Synthesizer mailing list

Hi!

I have recently started experiencing a problem with my AN200 Loop 
Factory. It restarts itself as soon as you turn it on. It does the 
startup sequence on the display, then simply restarts. When it does 
start properly, the orange buttons flicker slightly, the flickering 
is more intense if more LED's are lit. But as soon as you press play, 
it restarts. I've tried doing the reset procedure. I've also tried 
cleaning the unit, and I made sure the grounds were making good solid 
contact on the access panel. 

The machine is completely useless right now, because the moment you 
start the sequencer, or press any buttons, it restarts.


Any help would be appreciated!

Nate