The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "digitaldisko" <digitaldisko@y...> 
wrote:
> 
> I still have not sucessfully performed a bulk dump and I changed 
the 
> settings to 1 sec.  I have a Tascam US-122 midi/sound card device. 

If I were you, I would take this to the Tascam Forums and post 
inquiring on issues performing SysEx dumps with the US-122. 

http://www.tascamforums.com/

also, make certain to check out

http://www.tascam.com/Products/US-122.html

to see that you have the most current drivers.  There was a post on 
the US-122 regarding XP SP2 which advised a clean install of the 
Tascam driver following the install of SP2.  Uncertain whether this 
applicable to your situation.  Also, you might check out the DX200 
list here at Yahoo! Groups where there are a handful of AN200 users 
too - perhaps somebody there has a US-122.

 
> Also, another weird thing that is happening is that when I use the 
> AN1x Editor and call up a persons patch list, I click on a patch 
and 
> nothing happens (My AN 200 will just think or be frozen) but then 
> the patch worked when I closed the program!  So I opened up the 
> program and turned it off hundreds of times last night just to 
check 
> out peoples patches!! Has anyone ever heard of my problem?  
>


Are you using AN1xEdit in PLG mode?  Don't recall which menu option 
this is under off the top of my head, but I suggest you make certain 
you are running AN1xEdit in PLG mode.  The problem you describe is 
unusual and I've not heard it desribed before on the list.  Do you 
have a similar issue with AN Expert Editor or just the bulk dump 
issue as described in your previous email.  Have you tried the editor 
plug-in with XGWorks Lite as uralmoto suggests in his response?  Do 
you experience any of these problems using XGWorks Lite?


Jon