The Yamaha AN1x Synthesizer mailing list

Thanks guys - not the answer I wanted (which was something like - 'switch it
off, toggle the flayrod and switch it on again, and it'll work fine':))) but
it is the solution I needed.

Right, where's me nearest Yamaha dealer...

Frank


   Date: Tue, 12 Oct 2004 17:18:29 -0000
   From: "Jon" <jondl_2000@...>
Subject: Re: AN1x problems - please help


--- In AN1x-list@yahoogroups.com, "Frank Blades" <frank@t...> wrote:
> Hi there,
>
> I have a slight (or possibly not slight at all) problem with my AN1x.
> Switched it on yesterday, and found that all my G notes don't work.
> Everything else is fine, but nothing when I hit a G - no matter which G on
> the keyboard I try.
>
> Before I take it down to the local music shop and take the potentially
huge
> bill (and before I burst into tears!!!) - can anyone offer any advise?
>
> Frank
>
> (in Bath, England - where ALL the houses are ancient:)

Hi Frank ((in Bath, England - where ALL the houses are ancient),

Great signature ;-)

You might review this thread in the list archives from a couple of years
ago:

http://launch.groups.yahoo.com/group/AN1x-list/message/5819

I didn't search forward from this post to determine if/how he resolved the
issue, but
the problem description is similar to your own. IMO, you're probably going
to need to
spring for service :-( Otherwise, you've a nice oversized, blue tone
generator :-/

regards,

Jon

________________________________________________________________________


   Date: Tue, 12 Oct 2004 18:15:07 -0000
   From: "spaceanimals" <rainbowjimmy@...>
Subject: re: AN1X problems


The board probably needs the key contacts cleaned. I'd get a service
tech to do it. You'll spend an hour just unscrewing everything.

Jimmy