The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "martinez21" <martin@b...> wrote:
> Hello all. I've just taken a bass sound on the AN1x and started 
> fiddling around with it, as you do of an evening. I noticed that when 
> you have one key pressed down, if you press another no note is 
> triggered. I thought it might be due to the fact that it was in mono 
> or legato mode, so I changed that to Poly and, just to avoid any 
> other complications, I made sure Portamento was off and I switched 
> Layer from Unison Dual to plain old Single. And yet the situation 
> remains - I can play a three-note chord, say, but when I go to change 
> one of the notes (with the others still pressed down), I get no noise 
> from that new key.
> 
> I've fiddled around with some of the parameters, opening up the VCA 
> and VCF envelopes, for example, but that doesn't alter it either.
> 
> I've probably overlooked something simple here, as usual. Any ideas, 
> clever people?
> 
> Cheers,
> Martin

Martin,

From your problem description I would hazard a guess you're not editing the Scene 
you intended to - double check the Voice is not in Dual mode. I often overlook Dual 
Mode and wonder why my edits are not effective - typically I'm editing the wrong 
Scene in my Voice.

If the problem persists, and you've double checked the Mode is Poly -not Mono or 
Legato - then I would suggest reinitializing the AN1x to it's factory default settings.

Jon