The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-04-28 22:40 UTC

Message

Re: [AN1x] Re: sustain pedal ?

2003-09-01 by Bruce Wahler

Hi Juan,

>I'm uncertain whether the BOSS pedal is the same polarity as the Yamaha (Bruce 
>would probably know the answer.) If not then it will work in reverse: when open 
>sounds will sustained - when closed sounds will not.

As originally designed, the BOSS pedal will probably work backwards, unless it has a switch to select the polarity.  Roland polarity and Yamaha polarity are opposites.  Most BOSS pedals have polarity switches, though; my FS5U and FS5L pedals do.  If you're adventurous with a soldering iron, most non-selectable pedals actually have internal connections for setting up the opposite polarity:  I've often changed both Yamaha and Roland pedals in this manner to suit my gear-lust habits.  ;^)  The Roland sustain pedal even has the polarities marked as "NO" and "NC" on the PC board.

Oh and Jon, the FC-7 is still sold, and widely used.  Korg ships their version with the CX-3 and BX-3 organs.

Regards,

-BW
--
Bruce Wahler
Ashby Solutions\ufffd   http://music.ashbysolutions.com
978.386.7389  voice/fax
bruce@...

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.