The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "sonarcade" <sonarcade@y...> wrote:

> I've noticed that the midi light doesn't come on the 
> pro53 for some knobs although the midi registers in Logic.

I just realized that my control change mode was set on mode 1 and not 
mode 2.  So midi's fine.  But does anyone else that uses this have 
any explanations and possible workarounds to the fact that the wave 
parameter for VCO1 on the an1x is used as a swtich to only 
disable/enable the sawtooth wave and the fine param is used to 
disable/enable the square wave?  There's a slew of other parameters 
that don't match between the AN1x and the Pro53 and I've tried to 
manually "dump" a patch from the AN1x to the Pro53 using the control 
map for the an1x that I have.  So it really seems like Timo's 
suggestion of using synthedit is the only way to get around this 
problem of not being able to find a way to dump patches onto a VSTi.