The Yamaha AN1x Synthesizer mailing list

Bruce,

What does the last midi in from the second module to the AN1X do?
thanks.




--- In AN1x-list@yahoogroups.com, Bruce Wahler <bruce@a...> wrote:
> Hi Jimmy,
> 
> >What do I need to use the AN1x to control 2 synth modules?
> 
> 
> A lot depends what you want the other modules to do.
> 
> Generally, though, I would turn Local Off, and connect the modules 
like so:
> 
> An1x Out --> Module 1 In
> Module 1 Thru --> Module 2 In
> Module 2 Thru --> An1x In
> 
> This way, the AN1x isn't automatically on all the time.  Now set 
the AN1x Rx Channel to CH1, Module 1 to CH2, and Module 2 to CH3.  
Then use the An1x Tx Channel to switch between synths.
> 
> If you want to do more complex things (layering, splits), you 
might need to add some MIDI processors in the chain, depending on 
the setup you want.  Contact me offline if you need more details.
> 
> Regards,
> 
> -BW
> --
> Bruce Wahler
> Ashby Solutions™   http://music.ashbysolutions.com
> 978.386.7389  voice/fax
> bruce@a...