The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, DMANX@t... wrote:
> Just in case you did not get my last question, here it is again.
> 

Did you not read Gary's reply? This is EXACTLY the post to which 
he responded - and I believe he did an exceptional job of trying to 
address all your recent points.

You *really* must take more time to review the replies to your 
posts before reposting your questions - this appears to be 
nothing more than laziness on your part judging by how often it 
occurs.

Furthermore, much of this information is available in the Read 
Me files included with AN1xEdit. And if you weren't aware, many 
of your SW1000XG/PLG150xx questions are addressed at the 
XG Audio Factory web site:

http://www.xgfactory.com/

You will find MANY free downloads, FlashROM updaters, 
manuals and resources for Cubase, Logic, Cakewalk, etc. there 
-- and of course at the PLG150AN page:

http://www.xgfactory.com/html/plg/p150anx.htm

and the Yamahasynths Downloads page too:

http://www.yamahasynth.com/down/main.htm

That XG Works XP update mentioned on this list recently can be 
had there.

That said...

> I'm having trouble saving newly created voices with added 
comments in an1xedit.I have created a new user sequence from 
scratch.Not using any exg voices to start of with.Once I created 
the voice, I highlight the voice and went to both action/bulk 
section (in user mode),and pressed send.Then I pressed store 
current under action/bulk section(in user mode) sections,then 
saved the file as .anp file.


I assume you are using AN1xEdit in PLG150AN Mode, correct? 
This is found under the Setup menu. You find the program will 
automatically close the currently active Voice bank when 
switching to/from PLG150AN mode. You can only Save an .anp 
file while in PLG150AN mode so I assume you've made it this 
far.


>I close down anx1edit,then recall it back again, go into user 
voices, but cannot find the voice with added comments? 


From this description it sounds as though you are not working 
with the Voice bank you believe you saved to your hard drive. Are 
you *certain* you gave the Voice bank an independent name and 
saved it accordingly with the .anp suffix?


>But I know which user voice number it is,so I highlight it,click on 
send under action/bulk, but here a difrent voice,so I refresh synth 
still here a diffrent voice.


This all but confirms you are NOT working with the Voice bank 
you believe you saved as an .anp file.


>So I have to hit send and refresh  a number of times till the 
voice I created comes back.


It sounds as though the Refresh command is being issued from 
an *empty* Voice bank against your PLG150AN and eventually 
the 1st edit you 'stored' in the User program location is being 
recalled, i.e. refreshed.

>But still with no name or comments on the patch?


Becuase it's not the Voice bank you believe you saved as an .anp 
file.


> Were am I going wrong?


You are not working with the Voice bank you believe you saved 
as an .anp file.


> I also heard that you can send sounds of the an150 to XG 
effects.How is this done,or am I getting cofused.
> 


You'll find loads of info regarding the SW100XG and many 
tutorials at the XG Audio Factory web site.

I believe you should get past saving and recalling your files in a 
predictable manner and demonstrating that you acknoweldge 
and understand the replies you receive to your posts before you 
advance to more complicated subject matters.

Furthermore, this is not an SW1000XG support group so 
SW1KXG answers from list members may not be forthcoming 
(particularly since is the third time this post has made it to the list 
and no one has taken up the question yet...)

Jon