The Yamaha AN1x Synthesizer mailing list

ok, heres the deal. the an1x transmits a bunch of data via MIDI out. 
after messing with the portamento and PEG/LFO knobs and other knobs 
too.. ive realized that the an1x can drastically change sounds from 
an external tone generator, unwanted for the most part, but i think 
these effects might be useful sometime. i cant figure out how to cut 
off all this MIDI data from being transmited, BUT i can filter the 
data from being recorded using the rm1x MIDI settings. although, i 
still hear unwanted effects (portamento especially) when im recording 
a track or improvisng. so basically i think there is no way i can 
stop the an1x from transmiting all this extra data via MIDI out, but 
i can filter it from being recorded into my sequencer. thanks for all 
the replies.

cheers
dave

--- In AN1x-list@y..., "Jon" <jondl_2000@y...> wrote:
> AFAIK there is no method to disable the transmission of 
> Channel Pressure from the AN1x. I downloaded a copy of the 
> XL1 manual from E-mu and there does not appear to be a global 
> disable for Channel Pressure - he'll likely have to disable 
> Channel Pressure as a Modulation Source for the XL1 Patch in 
> question. I could be mistaken so I'd advise checking in with the 
> XL1 list here at Yahoo! Groups.
> 
> Have you tried running the XL1 off the RM1x MIDI Thru? Does the 
> RM1x allow filtering of Continuos Controllers? Most software 
> sequencers and some multi-port MIDI Interfaces allow filtering of 
> PB, AT, and CC's.
> 
> Jon
> 
> --- In AN1x-list@y..., "Bob Smith" <bob-smith@h...> wrote:
> > sounds like the aftertouch - you can teach your X11 to ignore it, 
> or turn it off on the an1x
> >   ----- Original Message ----- 
> >   From: kollegekid12345 
> >   To: AN1x-list@y... 
> >   Sent: Sunday, October 13, 2002 8:12 PM
> >   Subject: Re: [AN1x] FRUSTRATING! BAH.. can i get some help
> > 
> > 
> >   the MOD wheel is all the way down.. im trying all the possible 
> MIDI 
> >   setups... but the an1x is still giving off some type of signal 
and 
> >   effecting the sounds in the xl1 =(
> > 
> >   is there a way to just kill the modulation effect i.e. remove 
it 
> from 
> >   the MIDI system?
> > 
> >   looks like imma have to drag that old casio piece of **** out 
of 
> the 
> >   closet and use that for a MIDI controller...
> > 
> >   --- In AN1x-list@y..., "Jon" <jondl_2000@y...> wrote:
> >   > Acutally, I think the AN1x data at the MIDI Out port is 
> duplicated 
> >   on 
> >   > the MIDI Thru port. The easiest way to trouble shoot is to 
> remove 
> >   > the RM1x from the MIDI chain. Simply go AN1x MIDI Out --> 
> XL1 
> >   > MIDI In for trouble shooting.
> >   > 
> >   > I suspect either 1) the MOD Wheel is not zeroed out, i.e., 
all 
> the 
> >   > way down, and is modulating the LFO Speed or LFO Depth 
> on 
> >   > the XL1 or 2) he's applying enough key pressure on the 
> AN1x to 
> >   > trigger the aftertouch which is modulating some parameter 
> on 
> >   > his XL1 (just as the MOD Wheel would.)
> >   > 
> >   > Hope this helps.
> >   > 
> >   > regards,
> >   > 
> >   > Jon
> >   > 
> >   > --- In AN1x-list@y..., "jez creek" <jez@j...> wrote:
> >   > > If the out of the an1x is connected to the rm1x then it 
> cannot be 
> >   > affecting
> >   > > the xl1, it is most probable that the source of your 
problem 
> is 
> >   > the rm1x as
> >   > > it's midi data is copied out of the an1x thru.
> >   > > Jez Creek
> >   > > http://www.shadowdancer.info
> >   > > 
> >   > >  -----Original Message-----
> >   > > From: kollegekid12345 [mailto:kollegekid12345@y...]
> >   > > Sent: 14 October 2002 00:11
> >   > > To: AN1x-list@y...
> >   > > Subject: [AN1x] FRUSTRATING! BAH.. can i get some help
> >   > > 
> >   > > 
> >   > > 
> >   > >   im using the an1x to trigger the sounds from a sound 
> >   > module... the
> >   > >   porblem is.. the an1x adds some type of modulation to 
> >   > external
> >   > >   sounds.. its some type of modulation (fine up and down 
> picth 
> >   > changes)
> >   > >   that are annyoing as heck when putting together any type 
> of 
> >   > melody. i
> >   > >   dont understand how the an1x is automatically effecting 
> my 
> >   > sound
> >   > >   modules sounds.
> >   > > 
> >   > >   my MIDI set up is
> >   > > 
> >   > >   rm1x out > an1x in
> >   > >   an1x thru > xtreme lead (sound module) in
> >   > >   an1x out > rm1x in
> >   > > 
> >   > >   thanks
> >   > >   dave
> >   > >
> > 
> > 
> >         Yahoo! Groups Sponsor 
> >               ADVERTISEMENT
> >              
> >               
> >        
> >        
> > 
> >   Community email addresses:
> >     Post message: AN1x-list@y...
> >     Subscribe:    AN1x-list-subscribe@y...
> >     Unsubscribe:  AN1x-list-unsubscribe@y...
> >     List owner:   AN1x-list-owner@y...
> > 
> >   Shortcut URL to this page:
> >      http://groups.yahoo.com/group/AN1x-list
> > 
> > 
> >   Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> Service. 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]