The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@y..., christopher john stone <christone@o...> 
wrote:
> 
> I want to modify the settings of my AN1X's pitch bend wheel 
> to enable me to pitchbend a sound over a much greater range 
> than it will currently allow (which is only one note)
> 
> The sound needs to start at a very low freq - perhaps 50-
> 100Hz? - at the bottom of the wheel's travel, and then be 
> pitchbent to a mid-range, piano sort-of frequency at the 
> centre wheel setting, then off up into the sonic stratosphere 
> at the top of the travel
> 
> I sense that it should be easy, but cannot seem to do it - 
> either through the front panel or via AN1X Edit.  
> 
> Can anyone help?
> 
> Thx, C

From the Ctlk Matrix, under VOICE/SCENE SETUP, use the Set 
No parameter to choose Pitch Up and/or Ptich Down then use 
the Depth paramter to set the desired Pitch Bend range. The 
positive and negative amounts can be set independently - the 
range can be adjusted +/- two octaves.

regards,

Jon