The Yamaha AN1x Synthesizer mailing list

Hi Dysonn,

AFAIK, one can't disable program change from the AN1x, however, on the
JP-8080, under "MIDI" there's an option called "Tx/Rx ProgChg Sw". Switch
this off and the JP-8080 will now ignore any program changes.

Are you working with a sequencer? If so, I'd leave the JP-8080 Program
Change Switch on, and be sure to not change presets on the AN1x while
working/recording/editing a JP-8080 sequence. Maybe you have a need to
control both synths from the AN1x at the same time(?), but this is what I'd
do.

Hope that helps.

Phil



From: "dysonn1" <dysonn1@...>
Reply-To: AN1x-list@yahoogroups.com
Date: Sat, 23 Feb 2002 03:07:45 -0000
To: AN1x-list@yahoogroups.com
Subject: [AN1x] Program Change--Need Help!!


Hi guys, I have an AN1x that is controlling my JP-8080 and I cannot
figure out how to shut off the program change commands the AN1x is
sending the JP.  Whenever I change an AN1x patch the JP also changes
its patch which is annoying.  Could anyone please give me some advice
on how to remedy this.  Thanks in advance.

-dysonn



Community email addresses:
  Post message: AN1x-list@yahoogroups.com
  Subscribe:    AN1x-list-subscribe@yahoogroups.com
  Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
  List owner:   AN1x-list-owner@yahoogroups.com

Shortcut URL to this page:
   http://groups.yahoo.com/group/AN1x-list
 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/