The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@y..., "Jake B" <drummer@p...> wrote:

> nope...no clicking or poping at all. Just very little output. Do

you have

> a number to customer service?

Go here...http://www.yamaha.com/service.htm

Also do you think it would be bad to use the

> headphone output for now? Becasue I use this synth live and have

gigs

> coming up. Also could it be some how one of my other pieces of

gear that

> casued the problem.

The only way to determine where the problem lies is, as Ed implied,
through process of elimination. You're running the synths to a Line
Mixer and then to a main mixer, right? So, unplug everything and
reconnect each instrument individually. I'd suggest removing one or
the other mixer from the equation to begin with and repeat the
exercise with each mixer. If the Yamaha continues to misbehave in
each circumstance then at least you have something definite to take
to Yamaha tech support.

I suspect it will okay to run off the headphone output for the time
being. Depending on your monitoring situation, i.e., mono vs. stereo,
you might require a stereo y-cable.


I have a rolls rack mixer and a korg mono poly running

> through it too. With an older yamaha mixer I had the mono poly

would cut

> the output on the rest of the synths to almost nothing. I think it

was just

> the mixer tho.
>
> TIA,
> Jake

Let us know how it works out.

Jon