On first thought, it sounds like it has to go on the bench... but wait. I had some TERRIBLE problems with mine after loading up some patches, so I re-initialized it to the factory settings and it fixed everything. The re-init procedure is in the back of the manual somewhere. hope this works for you Ed Edwards Leader: Ezekiel's Wheel \ufffd\ufffd\ufffd\ufffdRetro-Progressive Rock\ufffd\ufffd\ufffd\ufffd http://www.untiedmusic.com/ezekiel http://artists.mp3s.com/artists/227/ezekiels_wheel.html \ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd \ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd ----- Original Message ----- From: "Jake B" <drummer@...> To: <AN1x-list@yahoogroups.com> Sent: Thursday, July 12, 2001 7:52 AM Subject: Re: [AN1x-list] Re: outputs > It is being run into a rolls 10 channel stereo line mixer. Which then runs > into a 16 channel peavy mixer. > should be ok > > Jake > ----- Original Message ----- > From: "Ed Edwards" <edward.edwards@...> > To: <AN1x-list@yahoogroups.com> > Sent: Wednesday, July 11, 2001 11:29 PM > Subject: Re: [AN1x-list] Re: outputs > > > > Sometimes the doctor has to ask personal questions that may embarrass you > > like, "How far was your nose in the young ladies room before she slammed > the > > door on it?" In your case we'd have to ask, "What are/were you running > your > > outputs into? The output circuitry is looking for a standard line level > > load such as a mixer, keyboard amp or similar input, and without the > proper > > load for the An1x final amps all sorts of bad things may happen in the > > signal chain. > > > > Ed Edwards > > Leader: Ezekiel's Wheel \ufffd\ufffd\ufffd\ufffdRetro-Progressive Rock\ufffd\ufffd\ufffd\ufffd > > http://www.untiedmusic.com/ezekiel > > http://artists.mp3s.com/artists/227/ezekiels_wheel.html > > \ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd > > \ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd\ufffd.\ufffd\ufffd > > ----- Original Message ----- > > From: "Jake B" <drummer@...> > > To: <AN1x-list@yahoogroups.com> > > Sent: Wednesday, July 11, 2001 11:15 PM > > Subject: Re: [AN1x-list] Re: outputs > > > > > > > nope...no clicking or poping at all. Just very little output. Do you > > have > > > a number to customer service? Also do you think it would be bad to use > > the > > > headphone output for now? Becasue I use this synth live and have gigs > > > coming up. Also could it be some how one of my other pieces of gear > that > > > casued the problem. I have a rolls rack mixer and a korg mono poly > > running > > > through it too. With an older yamaha mixer I had the mono poly would > cut > > > the output on the rest of the synths to almost nothing. I think it was > > just > > > the mixer tho. > > > > > > TIA, > > > Jake > > > > > > ----- Original Message ----- > > > From: <jondl_2000@...> > > > To: <AN1x-list@yahoogroups.com> > > > Sent: Wednesday, July 11, 2001 9:16 PM > > > Subject: [AN1x-list] Re: outputs > > > > > > > > > > --- In AN1x-list@y..., "Jake B" <drummer@p...> wrote: > > > > > The outputs on my An1x have hardly any output. It seems like they > put > > > out some sound and then fade off really quick. The headphone output > works > > > fine but the main left and right is very low. Any ideas what could > casue > > > this? It was working fine and then nothing. > > > > > > > > > > TIA, > > > > > Jake > > > > > > > > > > > > > > > > > > Yikes! > > > > > > > > Jake, I've not heard of that problem with an AN1x. Has anybody else on > > > > the list? > > > > > > > > Did your AN1x ever exhibit the infamous 'popping and clicking' sound > at > > > > start-up? If so, did you (or a previous owner?) ever have the repair > > > > affected by Yamaha? I ask these questions only to see if there's any > > > > relation between the old problem (the audible crackling) and the > > > > problem you've descibed (audio drop-off.) > > > > > > > > I'd hazard a guess this is a service issue and encourage you to > contact > > > > Yamaha Customer Assistance or a local Service Center. Prefably one > that > > > > you TRUST!. FWIW - I had the hardware repair for the 'old' problem > > > > completed some time ago and have never had a reoccurence. > > > > > > > > > > > > HTH, > > > > > > > > Jon > > > > > > > > > > > > > > > > Community email addresses: > > > > Post message: AN1x-list@yahoogroups.com > > > > Subscribe: AN1x-list-subscribe@yahoogroups.com > > > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com > > > > List owner: AN1x-list-owner@yahoogroups.com > > > > > > > > Shortcut URL to this page: > > > > http://groups.yahoo.com/group/AN1x-list > > > > > > > > > > > > Your use of Yahoo! Groups is subject to > > http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > > > > > > > > > > > > > > Community email addresses: > > > Post message: AN1x-list@yahoogroups.com > > > Subscribe: AN1x-list-subscribe@yahoogroups.com > > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com > > > List owner: AN1x-list-owner@yahoogroups.com > > > > > > Shortcut URL to this page: > > > http://groups.yahoo.com/group/AN1x-list > > > > > > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > Community email addresses: > > Post message: AN1x-list@yahoogroups.com > > Subscribe: AN1x-list-subscribe@yahoogroups.com > > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com > > List owner: AN1x-list-owner@yahoogroups.com > > > > Shortcut URL to this page: > > http://groups.yahoo.com/group/AN1x-list > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > > Community email addresses: > Post message: AN1x-list@yahoogroups.com > Subscribe: AN1x-list-subscribe@yahoogroups.com > Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com > List owner: AN1x-list-owner@yahoogroups.com > > Shortcut URL to this page: > http://groups.yahoo.com/group/AN1x-list > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > >
Message
Re: [AN1x-list] Re: outputs
2001-07-12 by Ed Edwards