The Yamaha AN1x Synthesizer mailing list

The velocity control is independent of aftertouch on the AN1x. There 
is no control on the AN1x to reduce the amount AT transmitted from 
the keyboard. You'll need to reduce the modulation depth setting at 
the destination MIDI module as Ray already suggested.

If you are using a software sequencer you could apply a filter to 
exlude AT. Some programs permit this as a global setting but it might 
be possible at the track level as well - depends on the program.

regards,

Jon

--- In AN1x-list@y..., dbase789@a... wrote:
> Hy. Don't know if it is precisely what your looking at, but you 
> should try -if not already- to lower the velocity of the key board.
> it's in Utility/Setup third switch..
> I think there i a way to disable or minor the AT sensitivity, but 
> can't tell you how precisely.
> Hope it can help.
> 
> --- In AN1x-list@y..., midisys@f... wrote:
> > When i play samples on my Akai S2000 and using the AN1x to 
trigger 
> > the samples, the samples play with to much aftertouch.
> > When i trigger the samples with another kb the samples sound o.k.
> > Is it possible to adjust the aftertouch on my AN1x?
> > I looked at the manual but coud'nt find it...
> > 
> > thanx in advance
> > Johan van Beek