The Yamaha AN1x Synthesizer mailing list

Oh yeah, I'm holding it alright. It's very strange, cause the assign 
switch works fine. The one thing I haven't tried is re-initializing 
after backing up my patches. That may do it.

D.


--- In AN1x-list@egroups.com, jondl@j... wrote:
> That's disappointing to hear regarding Yamaha Tech Support. My 
> experiences have all been positive - I wonder whay the lack of 
> consistency? Anyway...are you hodling the ASSIGN button down the 
entire 
> time it takes for the AN1x to power on? On my unit the display show 
> "Ctrl Mode mode2" for a couple of seconds before the display 
switches 
> to the last used Voice.
> 
> Jon
> 
> --- In AN1x-list@egroups.com, "David  Bagshaw" 
<epiphanius.geo@y...> 
> wrote:
> > Actually, Jon, no, it still doesn't work. There is no difference 
in 
> > the display whether I press assign or not. Somewhat annoying, at 
this 
> > point. I'd love to find out what I'm doing wrong. I tried to get 
help 
> > at the Yamaha U.S. site, but I'm Canadian, and they won't offer 
> > support to me. The Yamaha Canada site is dreadful.
> > 
> > Thanks for your help anyway Jon, for your site and for your 
> > contributions to this one.
> > 
> > 
> > --- In AN1x-list@egroups.com, jondl@j... wrote:
> > > David,
> > > Did you ever get this woring? I tried it again tonight for the 
1st 
> > time 
> > > in months - Turn the power off; hold the ASSIGN button; turn 
the 
> > power 
> > > on (while still holding the ASSIGN button.) The display will 
show 
> > which 
> > > Control Change Mode the AN1x is in - 1 or 2. Repeat the process 
to 
> > > change back from one mode to the other. The MIDI CC behavior is 
> > > documented on Page 9 of the Data List pamphlet. Pretty cool 
stuff 
> > if 
> > > you like to record some serious patch changes into a sw 
sequencer.
> > > 
> > > Jon
> > >  
> > > 
> > > --- In AN1x-list@egroups.com, "David  Bagshaw" 
> > <epiphanius.geo@y...> 
> > > wrote:
> > > > It says in the manual to hold the "assign" button while 
powering 
> > up 
> > > > in order to change the control change mode, and that the mode 
> > number 
> > > > (1 or 2) will appear on the display. I've tried dthis several 
> > times 
> > > > and nothing changes, and nothing appears in the display. is 
there 
> > a 
> > > > typo in the manual (i.e. is there another way to change to 
> > control 
> > > > change mode 2)?
> > > > 
> > > > Thanks,
> > > > 
> > > > David