The Yamaha AN1x Synthesizer mailing list

Have you checked out Cubase.net? Go to http://www.cubase.net/ and you 
will find forums for all Steinberg software and related items, i.e., 
Sound Cards, VST plug-ins, etc. 

Perhaps it a conflict between drivers. Have you been to the Echo
Audio 
site lately? I noticed they have MANY new public beta drivers for
both 
Win and Mac (I use an Echo Gina card.) VST 5 is still pretty new - 
could be a conflict with the Sound Blaster card or the MOTU.

If it were my problem - I'd simplify my kit for troubleshooting.
Strip 
down to just Cubase, a MIDI Interface and ONE synth - make certain
THAT 
works and THEN reintroduce your sound card and other synths. Once
that 
is working - reintroduce your other pieces of software.

Good luck.

Jon

--- In AN1x-list@egroups.com, AZAGOTH1@a... wrote:
> Hi! i just recently purchased cubase VST 5.0 and i love it except
for 
> one thing, i cant get my midi to work properly! i hope someone on 
> here can pleeeeeease help me out.what happens is this: the first 
> measure gets cut off (no audio or midi signal) then after it loops 
> through once, the last half of the 4th measure gets cut off
abruptly 
> while the first measure plays?? This happens for every one of my 
> synths and midi connected instruments but doesnt happen if i
instead 
> use a vst instrument on the track?? I leave a full measure
beforehand 
> for my program change messages and everything to get sent to my 
> An1X's as i know they need about half a second to kick in. in fct
i'm 
> not even sending any program change messages but do that as a 
> precaution. i leave more than enough time for that..can someone 
> please help? i've got no hair left from ripping it all out trying
to 
> figure this out!
> My Setup: Pentium 3 733 with 256 mb of PC133 RAM and AGP vid card
>           Running Windows 98 SE 
>           Cubase VST 5.0
>           MOTU Midi Express XT Paralell midi interface
>           Sound Blaster Live gold
>           Echo Mona using the ASIO drivers that came with it
>           Yamaha AN1X as my master controller
>           Another Yamaha AN1X, FS1R, TX81Z
>           Korg I4s
> I've tried checking all the settings in cubase and read through 
> the "getting started book" 5 million times but i cant fix this. i 
> hope someone can help me out. thanks in advance to everyone for 
> listening to me rant. thanks and any help/sugges
tions/troubleshooting 
> tips would be GREATLY appreciated. thanks!