The Yamaha AN1x Synthesizer mailing list

Hi! i just recently purchased cubase VST 5.0 and i love it except for 
one thing, i cant get my midi to work properly! i hope someone on 
here can pleeeeeease help me out.what happens is this: the first 
measure gets cut off (no audio or midi signal) then after it loops 
through once, the last half of the 4th measure gets cut off abruptly 
while the first measure plays?? This happens for every one of my 
synths and midi connected instruments but doesnt happen if i instead 
use a vst instrument on the track?? I leave a full measure beforehand 
for my program change messages and everything to get sent to my 
An1X's as i know they need about half a second to kick in. in fct i'm 
not even sending any program change messages but do that as a 
precaution. i leave more than enough time for that..can someone 
please help? i've got no hair left from ripping it all out trying to 
figure this out!
My Setup: Pentium 3 733 with 256 mb of PC133 RAM and AGP vid card
          Running Windows 98 SE 
          Cubase VST 5.0
          MOTU Midi Express XT Paralell midi interface
          Sound Blaster Live gold
          Echo Mona using the ASIO drivers that came with it
          Yamaha AN1X as my master controller
          Another Yamaha AN1X, FS1R, TX81Z
          Korg I4s
I've tried checking all the settings in cubase and read through 
the "getting started book" 5 million times but i cant fix this. i 
hope someone can help me out. thanks in advance to everyone for 
listening to me rant. thanks and any help/suggestions/troubleshooting 
tips would be GREATLY appreciated. thanks!

Have you checked out Cubase.net? Go to http://www.cubase.net/ and you 
will find forums for all Steinberg software and related items, i.e., 
Sound Cards, VST plug-ins, etc. 

Perhaps it a conflict between drivers. Have you been to the Echo
Audio 
site lately? I noticed they have MANY new public beta drivers for
both 
Win and Mac (I use an Echo Gina card.) VST 5 is still pretty new - 
could be a conflict with the Sound Blaster card or the MOTU.

If it were my problem - I'd simplify my kit for troubleshooting.
Strip 
down to just Cubase, a MIDI Interface and ONE synth - make certain
THAT 
works and THEN reintroduce your sound card and other synths. Once
that 
is working - reintroduce your other pieces of software.

Good luck.

Jon

--- In AN1x-list@egroups.com, AZAGOTH1@a... wrote:
> Hi! i just recently purchased cubase VST 5.0 and i love it except
for 
> one thing, i cant get my midi to work properly! i hope someone on 
> here can pleeeeeease help me out.what happens is this: the first 
> measure gets cut off (no audio or midi signal) then after it loops 
> through once, the last half of the 4th measure gets cut off
abruptly 
> while the first measure plays?? This happens for every one of my 
> synths and midi connected instruments but doesnt happen if i
instead 
> use a vst instrument on the track?? I leave a full measure
beforehand 
> for my program change messages and everything to get sent to my 
> An1X's as i know they need about half a second to kick in. in fct
i'm 
> not even sending any program change messages but do that as a 
> precaution. i leave more than enough time for that..can someone 
> please help? i've got no hair left from ripping it all out trying
to 
> figure this out!
> My Setup: Pentium 3 733 with 256 mb of PC133 RAM and AGP vid card
>           Running Windows 98 SE 
>           Cubase VST 5.0
>           MOTU Midi Express XT Paralell midi interface
>           Sound Blaster Live gold
>           Echo Mona using the ASIO drivers that came with it
>           Yamaha AN1X as my master controller
>           Another Yamaha AN1X, FS1R, TX81Z
>           Korg I4s
> I've tried checking all the settings in cubase and read through 
> the "getting started book" 5 million times but i cant fix this. i 
> hope someone can help me out. thanks in advance to everyone for 
> listening to me rant. thanks and any help/sugges
tions/troubleshooting 
> tips would be GREATLY appreciated. thanks!

Hello

     Try removing your SB card from the computer. There's a lot of people
having problems with midiconnection when using SB-cards. I couldn't get my
midicard working until I removed my SB-card.

Jan

mailto:pergamon@...

> Hi! i just recently purchased cubase VST 5.0 and i love it except for
> one thing, i cant get my midi to work properly! i hope someone on
> here can pleeeeeease help me out.what happens is this: the first
> measure gets cut off (no audio or midi signal) then after it loops
> through once, the last half of the 4th measure gets cut off abruptly
> while the first measure plays?? This happens for every one of my
> synths and midi connected instruments but doesnt happen if i instead
> use a vst instrument on the track?? I leave a full measure beforehand
> for my program change messages and everything to get sent to my
> An1X's as i know they need about half a second to kick in. in fct i'm
> not even sending any program change messages but do that as a
> precaution. i leave more than enough time for that..can someone
> please help? i've got no hair left from ripping it all out trying to
> figure this out!
> My Setup: Pentium 3 733 with 256 mb of PC133 RAM and AGP vid card
>           Running Windows 98 SE
>           Cubase VST 5.0
>           MOTU Midi Express XT Paralell midi interface
>           Sound Blaster Live gold
>           Echo Mona using the ASIO drivers that came with it
>           Yamaha AN1X as my master controller
>           Another Yamaha AN1X, FS1R, TX81Z
>           Korg I4s
> I've tried checking all the settings in cubase and read through
> the "getting started book" 5 million times but i cant fix this. i
> hope someone can help me out. thanks in advance to everyone for
> listening to me rant. thanks and any help/suggestions/troubleshooting
> tips would be GREATLY appreciated. thanks!
>
>
>
> Community email addresses:
>   Post message: AN1x-list@onelist.com
>   Subscribe:    AN1x-list-subscribe@onelist.com
>   Unsubscribe:  AN1x-list-unsubscribe@onelist.com
>   List owner:   AN1x-list-owner@onelist.com
>
> Shortcut URL to this page:
>   http://www.onelist.com/community/AN1x-list
>