The Yamaha AN1x Synthesizer mailing list

What happens if you unplug everything except Power Adapter and 
headphones?

On 13 Feb 2008 at 23:42, Arthur Alexander Crichton wrote:

> Ok, I tried a factory reset and played the affected sounds again and
> it seemed to fix the problem. Then I leave my AN1x on and 5 minutes
> later the problem comes back:(
> 
> What will I do? Is my AN1x ready for the synth graveyard in the sky?
> 
> Please advise
> 
> 
> Arthur
> 
> 
> --- In AN1x-list@yahoogroups.com, "Arthur Alexander Crichton" 
> <ac010b4919@...> wrote:
> >
> > How do I reload the OS?
> > 
> > Is it the same as a factory reset? If so, I did a factory reset but
> > the problem still persists.
> > 
> > The problem is when I keep the key pressed the sound just abruptly
> > goes dull and low in volume which it shouldn't do. Its like the
> > cutoff has gone to "0" and the main volume has gone low.
> > 
> > Cheers
> > 
> > Arthur
> > --- In AN1x-list@yahoogroups.com, nung242 <nung242@> wrote:
> > >
> > > I would try backing up your patches, then maybe reload the OS. It 
> > worked for a problem I was having on my K-Station. Good Luck!
> > > 
> > > http://www.youtube.com/tillthenmusik          See the AN1x in 
> > action on the song " legend "
> > > 
> > > Arthur Alexander Crichton <ac010b4919@> 
> > wrote:                               Hi,
> > >  
> > >  I have a problem with my Yamaha AN1x.
> > >  
> > >  When I select some pad sounds on my AN1x the sounds are bright 
> and 
> > >  after about 3 seconds the sound just cuts off to a duller sound 
> > which 
> > >  is very low in volume. When I press the keys again all I get is 
> a 
> > >  faint dull sound. I try to play the keys harder but I still get 
> > this 
> > >  sound. Before I had this problem, those paticular patches used 
> to 
> > >  sound bright and full. Also, I have noticed some sounds sound 
> > thinner 
> > >  than what they used to and that sounds that rely on arpeggio or 
> > lfo 
> > >  sound muddy and strange.
> > >  
> > >  What is wrong with my beloved AN1X?
> > >  
> > >  I have tried cleaning the control knobs with switch cleaner but 
> I 
> > >  still get the same problem. BTW the rom version on my AN1x is 
> v1.02
> > >  
> > >  Please help.
> > >  
> > >  Arthur
> > >  
> > >  
> > >      
> > >                                
> > > 
> > >        
> > > ---------------------------------
> > > Never miss a thing.   Make Yahoo your homepage.
> > > 
> > > [Non-text portions of this message have been removed]
> > >
> >
> 
> 
> 
> 
> Community email addresses:
>   Post message: AN1x-list@yahoogroups.com
>   Subscribe:    AN1x-list-subscribe@yahoogroups.com
>   Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
>   List owner:   AN1x-list-owner@yahoogroups.com
> 
> Shortcut URL to this page:
>    http://groups.yahoo.com/group/AN1x-list
> 
> The AN1x Control Synthesizer FAQ::
>   http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
> 
> Yahoo! Groups Links
> 
> 
> 
> 


-- 

CZ/VZ 		mailing list	: http://groups.yahoo.com/group/CZsynth
FMHeaven	mailing list	: http://groups.yahoo.com/group/fmheaven/
FS1R 		mailing list	: http://www.ampfea.org/mailman/listinfo/fss-list
Vokator		mailing list	: http://groups.yahoo.com/group/vokator

http://www.summasounds.de/