The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-04-28 22:40 UTC

Message

Re: [AN1x] Sound problems with AN1x

2008-02-13 by Arthur Alexander Crichton

Ok, I tried a factory reset and played the affected sounds again and 
it seemed to fix the problem. Then I leave my AN1x on and 5 minutes 
later the problem comes back:(

What will I do? Is my AN1x ready for the synth graveyard in the sky?

Please advise


Arthur


--- In AN1x-list@yahoogroups.com, "Arthur Alexander Crichton" 
<ac010b4919@...> wrote:
>
> How do I reload the OS?
> 
> Is it the same as a factory reset? If so, I did a factory reset but 
> the problem still persists.
> 
> The problem is when I keep the key pressed the sound just abruptly 
> goes dull and low in volume which it shouldn't do. Its like the 
> cutoff has gone to "0" and the main volume has gone low.
> 
> Cheers
> 
> Arthur
> --- In AN1x-list@yahoogroups.com, nung242 <nung242@> wrote:
> >
> > I would try backing up your patches, then maybe reload the OS. It 
> worked for a problem I was having on my K-Station. Good Luck!
> > 
> > http://www.youtube.com/tillthenmusik          See the AN1x in 
> action on the song " legend "
> > 
> > Arthur Alexander Crichton <ac010b4919@> 
> wrote:                               Hi,
> >  
> >  I have a problem with my Yamaha AN1x.
> >  
> >  When I select some pad sounds on my AN1x the sounds are bright 
and 
> >  after about 3 seconds the sound just cuts off to a duller sound 
> which 
> >  is very low in volume. When I press the keys again all I get is 
a 
> >  faint dull sound. I try to play the keys harder but I still get 
> this 
> >  sound. Before I had this problem, those paticular patches used 
to 
> >  sound bright and full. Also, I have noticed some sounds sound 
> thinner 
> >  than what they used to and that sounds that rely on arpeggio or 
> lfo 
> >  sound muddy and strange.
> >  
> >  What is wrong with my beloved AN1X?
> >  
> >  I have tried cleaning the control knobs with switch cleaner but 
I 
> >  still get the same problem. BTW the rom version on my AN1x is 
v1.02
> >  
> >  Please help.
> >  
> >  Arthur
> >  
> >  
> >      
> >                                
> > 
> >        
> > ---------------------------------
> > Never miss a thing.   Make Yahoo your homepage.
> > 
> > [Non-text portions of this message have been removed]
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.