The Yamaha AN1x Synthesizer mailing list group photo

Yahoo Groups archive

The Yamaha AN1x Synthesizer mailing list

Index last updated: 2026-04-28 22:40 UTC

Message

Re: [AN1x] All D-keys and All Gis-keys don't work

2006-03-26 by Ed Edwards

Hi Ondrash,

As a technician, I can tell you that the advice you have been given so 
far is excellent.

First: Take out the screws on the bottom and look at the circuit board. 
  Wherever you see a cable plugged into a socket, remove it and plug it 
back in.  Maybe only one pin is weak and just doing this will fix the 
problem.

Second: You might try resetting it to the factory defaults.  This 
involves holding down a combination of buttons when you power the unit 
on.  Check the back of your manual to determine how to do this.

Third: If this doesn't work, then you may have to have the "keyboard 
matrix" repaired.  This is very easy for a technician and will involve 
the replacement of a diode worth under a dollar.


ondrash77 wrote:
> Hello.
> I received Yamaha AN1x from a eBay seller yesterday, but it doesn't
> work pretty well.  All D-keys on the keyboard transmits only aftertouch
> information. All Gis-keys doesn't transmitted anything. Do you know
> what's about a problem? I tried Factory reset An1x but a problem
> remains stil. If I tried play AN1x sounds by another masterkeyboard
> everything is OK....
> 
> Sorry my English isn't good....
> 
> Thank you Ondrash
> 
> 
> 
> 
> 
> Community email addresses:
>   Post message: AN1x-list@yahoogroups.com
>   Subscribe:    AN1x-list-subscribe@yahoogroups.com
>   Unsubscribe:  AN1x-list-unsubscribe@yahoogroups.com
>   List owner:   AN1x-list-owner@yahoogroups.com
> 
> Shortcut URL to this page:
>    http://groups.yahoo.com/group/AN1x-list
> 
> The AN1x Control Synthesizer FAQ::
>   http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.