68300

--- In 68300@yahoogroups.com, "Aaron J. Grier" <aaron@f...> wrote:
> On Tue, Sep 13, 2005 at 06:53:08AM -0000, jochen_stroebel wrote:
> > > p&e still sells BDM interfaces for CPU32 processors.
> > > http://www.pemicro.com/ .
> > 
> > Yes, but for a Student ist a little expensive, if you see the 
little
> > logic function the GAL has to do, perhaps someone has at least the
> > pinout with the signals on the Parallel-Port-Side of the P&E Micro
> > Interface for CPU32, so i can adapt my homemade PD-BDM-Interface 
on
> > Parallelportcable?
> 
> you could use the GNU debugger with your existing PD-BDM-Interface.

I will do it so, if all other way fail.
My homemade PD-BDM Interface is not testet completely, yet and i plan 
to write my own litte BDM Driver for it under Windows XP/2000

> > > there is also a reverse-engineered schematic and source code 
for a
> > > GAL to build a P&E compatible BDM interface at
> > > http://sourceforge.net/projects/bdm/ .
> > Yes, I see but there is only the discription Motorola IDC 
compatible
> > BDM cable, does it work with Codewarrior for 68k and my QUICC 
Board
> > from Motorola?  (I am not complete shure the Motorola IDC 
compatible
> > BDM cable ist complete equal (on parallel port side) to the 
P&E ?!? )
> 
> the ICD32 part is/was made by P&E.  it is the same part.

Many thanks, this was the missing Information, I needed.  :-)


> > One more question, ist the Wiggler IDC compatible, too?
> 
> I do not know.
> 
> -- 
>   Aaron J. Grier  |   Frye Electronics, Tigard, OR   |  aaron@f...