68300

On Tue, Sep 13, 2005 at 06:53:08AM -0000, jochen_stroebel wrote:
> > p&e still sells BDM interfaces for CPU32 processors.
> > http://www.pemicro.com/ .
> 
> Yes, but for a Student ist a little expensive, if you see the little
> logic function the GAL has to do, perhaps someone has at least the
> pinout with the signals on the Parallel-Port-Side of the P&E Micro
> Interface for CPU32, so i can adapt my homemade PD-BDM-Interface on
> Parallelportcable?

you could use the GNU debugger with your existing PD-BDM-Interface.

> > there is also a reverse-engineered schematic and source code for a
> > GAL to build a P&E compatible BDM interface at
> > http://sourceforge.net/projects/bdm/ .
> Yes, I see but there is only the discription Motorola IDC compatible
> BDM cable, does it work with Codewarrior for 68k and my QUICC Board
> from Motorola?  (I am not complete shure the Motorola IDC compatible
> BDM cable ist complete equal (on parallel port side) to the P&E ?!? )

the ICD32 part is/was made by P&E.  it is the same part.

> One more question, ist the Wiggler IDC compatible, too?

I do not know.

-- 
  Aaron J. Grier  |   Frye Electronics, Tigard, OR   |  aaron@...