200e

Do you need to have a pulse in and cv in at the same time ?
Or can I just have Pulse in only? I am talking the stage addressing 
Pulse in only no other pulse in or cv in.

Thanks

Ross



dougc356 wrote:
>
> Sorry for quality of this question, but you are applying a varying 
> signal to the "cv in" jack next to the "pulse" jack, right? Also, the 
> "strobed" light has to be lit.
>
> I could also be thinking about something completely different. Perhaps 
> you are talking about the left hand side "start/adv" pulse input. To 
> use that you must first set all the stages to "stop." At that point a 
> pulse in on the "start/adv" jack should advance one step.
>
> Of course if all of the above is old news to you there is always the 
> chance of hardware/firmware issues. I am on rev15.
>
> Doug
>
> --- In 200e@yahoogroups.com <mailto:200e%40yahoogroups.com>, amnesia 
> <amni56@...> wrote:
> >
> > I am finding the Pulse Stage Addressing has never worked? I have never
> > been able to see any stage addressing with just the pulse in?
> >
> > I assume my firmware is the latest as Ezra had my AFG for a month at
> > start of the year.
> >
> > ross
> >
> >
> >
> >
> > >
> > >
> >
>
>