Yahoo Groups archive

200e

Index last updated: 2026-04-28 22:38 UTC

Message

Re: [200e] Re: 4 x 201e - 4 cabinets linked

2009-06-28 by ezra buchla

if you buy an unpowered boat it will be shipped with the proper cabling
stuff for your particular need

On Fri, Jun 26, 2009 at 12:19 AM, amnesia <amni56@tpg.com.au> wrote:

>
>
> I think I forgot to ask the most obvious question.
>
> How can they be linked?
>
> I
>
> >
> >
> > there is a limited number of modules that can succesfully use the i2c bus
> > simultaneously. it's not an exact limit because it depends on the actual
> > modules involved. 24 is quite safe. 30 is probably ok. there's been
> plenty
> > of discussion of this topic on this list.
> >
> > maybe there is a design solution like chris mentioned. i for one will
> > not be
> > worrying about it; if i had that many modules i would be fine controlling
> > their presets in 2 large groups; could be interesting.
> >
> > so, ross: i'd say it's worth a try, especially since not everything in
> > your
> > cabinet is e-series.
> >
> > On Mon, Jun 22, 2009 at 10:23 PM, amnesia <amni56@tpg.com.au<amni56%40tpg.com.au>
> > <mailto:amni56%40tpg.com.au <amni56%2540tpg.com.au>>> wrote:
> >
> > >
> > > how do you link them?
> > >
> > > I am looking to add to my 18wls and looking at 2 more 201e-6 Could they
> > > be linked?
> > >
> > > Ross
> > >
> > >
> > > alt_mode wrote:
> > > >
> > > >
> > > > Yes, it works. I had 4 x 201e-4 rack mount cabinets connected
> together
> > > > in a previous configuration.
> > > >
> > > > Eric
> > > >
> > > > --- In 200e@yahoogroups.com <200e%40yahoogroups.com> <mailto:
> 200e%40yahoogroups.com <200e%2540yahoogroups.com>>
> > <200e%40yahoogroups.com> <mailto:
> > > 200e%40yahoogroups.com <200e%2540yahoogroups.com>>,
>
> > > > Alessandro Cortini <cortini@...> wrote:
> > > > >
> > > > > sorry...i didn't read that part....
> > > > >
> > > > > Yeah i think you should be fine!
> > > > >
> > > > > i agree...hopefully somebody more knowledgeable on the subject will
> > > > > chime in...
> > > > >
> > > > > A.
> > > > >
> > > > >
> > > > > On Jun 22, 2009, at 3:27 PM, Dennis Verschoor wrote:
> > > > >
> > > > > > Thanks Alesandro
> > > > > >
> > > > > > But with 4 panels off 4 modules i will be safe i think.
> > > > > > I just wonder if it would work but i think the answer will show
> up
> > > > > > soon.
> > > > > >
> > > > > > Cheers,
> > > > > >
> > > > > > Dennis
> > > > > >
> > > > > > On Tue, Jun 23, 2009 at 12:12 AM, Alessandro
> > > > > > Cortini<cortini@...> wrote:
> > > > > >>
> > > > > >>
> > > > > >> to my knowledge, the 200e patch storage won't work with more
> > than 24
> > > > > >> modules in the system (if it'll work at all with that many),
> > or 2 x
> > > > > >> 12
> > > > > >> cabinets.
> > > > > >> There were plans to interconnect two cabinets somehow in
> > order to be
> > > > > >> able to link them under one patch storage facility at one time,
> i
> > > > > >> think.
> > > > > >>
> > > > > >> I recall asking this question before and i seem to remember this
> > > much
> > > > > >> from the conversation.
> > > > > >>
> > > > > >> I could be (and hope i am) wrong...
> > > > > >>
> > > > > >> A.
> > > > > >>
> > > > > >> On Jun 22, 2009, at 3:09 PM, m0n075 wrote:
> > > > > >>
> > > > > >>> Hello list
> > > > > >>>
> > > > > >>> Can i link 4x 201e - 4 cabinets together and use one patch
> > storage
> > > > > >>> module once the 4 panels are filled and linked?
> > > > > >>> I am asking because i wanna build an enclosure like my Serge
> > > > > >>> modular.
> > > > > >>> And put the Buchla next to it.
> > > > > >>>
> > > > > >>> Like this> http://modular.googlepages.com/serge.jpg
> > <http://modular.googlepages.com/serge.jpg>
> > > > <http://modular.googlepages.com/serge.jpg
> > <http://modular.googlepages.com/serge.jpg>>
> > > > > >>>
> > > > > >>> Cheers,
> > > > > >>>
> > > > > >>> Dennis
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>> ------------------------------------
> > > > > >>>
> > > > > >>> Yahoo! Groups Links
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>
> > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Music at: http://mono-poly.blogspot.com/
> > <http://mono-poly.blogspot.com/>
> > > > <http://mono-poly.blogspot.com/ <http://mono-poly.blogspot.com/>>
> > > > > >
> > > > > >
> > > > > > ------------------------------------
> > > > > >
> > > > > > Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
>  
>


[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.