Hi,
there were also some improvements during the mk1-phase:
The first one's had no backup battery, all patches were lost when the
poly800 has been turned off.
2nd step has some areas on its PCB so its possible to add a backup battery
on your own.
3rd step has an in-built battery so the patches are never lost, also if you
put away power supply and batteries at the same time!
But, it often looses its patches if you connect it to a sequencer, I think
that's fixed on the Mark 2?
Olaf
----- Original Message -----
From: <ski55@...>
To: <korgpolyex@yahoogroups.com>
Sent: Saturday, October 20, 2001 5:53 PM
Subject: [korgpolyex] MK1 and MK2
Hi @all,
can anyone tell me, what´s the difference between the POLY800-MK1 and
MK2?
Thank you,
ski
To unsubscribe from this group, send an email to:
korgpolyex-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/