Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Test e-mail

From: <backshall1@...>
Date: 2015-06-18

Yes there are wires connecting the top and bottom, lots of them, but they should all be long enough to lift the top up and back. Remove all screws and machine screws from the bottom (no particular order), turn it right side up and lift the top. The top is heavy since all the keys go with it. In the bottom is just the main board and the C-cell compartment. Soldering wires to a lithium cell is not recommended because they can explode if overheated, although I’m sure there are plenty of people who have done it without maiming themselves. Can you tell us the serial number on the bottom? I’m trying to make a list of what version of main board is in which serial number range.
Don B.
 
Sent: Thursday, June 18, 2015 8:30 AM
Subject: Re: [korgpolyex] Test e-mail
 
 

Thank you!

 
That's exactly the type of help I was hoping for, I really appreciate it, looks like there's some good people around hear after all :)
 
I've been thinking,  why not just solder my own solder points to the battery? This might be horrendously stupid, but I don't know any better.
 
At any rate, my polly is doing the "Nothing but weird noises" thing again, after I re-loaded the factory content last time, so the problem isn't going away.....It's time, thanks for the useful info, wish me luck I'm going in.....