Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Test e-mail

From: <backshall1@...>
Date: 2015-06-09

If it already has a CR2032 battery in it, as Gordon says you just unsolder the old battery and solder in a new one. It’s a bit of a pain to get it open, since all screws/bolts on the bottom must be removed, and I mean ALL. Just remember that the biggest bolts (4 of them) go in the key bed, the shortest screws go under the front of the keyboard, and the longer screws go all the way around the back and two sides. Open it up and see what is in there. If you are lucky, maybe somebody has already replaced the battery with a battery holder so you can just pop a new one in without any soldering and without looking for a battery that has solder tabs. I don’t know what is in a DS-8.
Don B.
 
Sent: Tuesday, June 9, 2015 8:39 AM
Subject: Re: [korgpolyex] Test e-mail
 
 

On Mon, Jun 08, 2015 at 03:40:04PM -0700, Donal Finn terrible.dee@... [korgpolyex] wrote:

> Hey,
>
> Does anyone have a link to a
crystal clear instructions on changing the
> internal battery of a poly
800? (Or a Korg DS-8 for that matter)?
>
> Been poking around and
it seems this ancient wisdom is well guarded,

Open it up, remove battery, fit new battery.

--
Gordonjcp MM0YEQ