Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Re: HAWK beta release version - updated

From: Michael Hawkins <korgpolyex800@...>
Date: 2015-03-03

I cleaned up the bank switching a bit more so that it scales or not according to global 47. If global 47 is 1 then the bank change CC data should be 0-3 corresponding to banks 1-4. Data values above 3 will select  bank 4.

Also, I implemented global 48 that when set to 1 causes a patch update to occur after a valid CC bank change is received. Some people have been asking for that for some time. You have to be careful with this though because some controllers send bank msb,lsb, data followed by a patch change. Which means with global 48 set to one you're going to get two patch changes happening. One triggered by the HAWK itself and another one received from the controller.

These files are version 2.6.4.

/Mike

From: "domgoold@... [korgpolyex]" <korgpolyex@yahoogroups.com>
To: korgpolyex@yahoogroups.com
Sent: Monday, March 2, 2015 12:43 PM
Subject: [korgpolyex] Re: HAWK beta release version

 
sorry for piping up, just caught those last messages re sysex

ugh? does this mean that hitherto nobody was editing via sysex, only
via nrpn? (sysex being afaics the best way to edit midi devices)
(soz if i'm misreading)

if this is a new sysex implementation, would it be possible at some
stage to have a MIDI implementation/sysex chart such as published
usually for mainstream MIDI devices? (my 2c... :D )