Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Sequencer won't run

From: Michael Hawkins <korgpolyex800@...>
Date: 2014-09-14

Check the sequencer enable/disable switch on the back. It should be set to disable.

Mike


On Sunday, September 14, 2014 6:33 AM, "tim.tashpulatov@... [korgpolyex]" <korgpolyex@yahoogroups.com> wrote:


 
Hello fellows,

I have Hawk800 with software 2.55. I know version 2.59 is out for a while but haven't tried it yet.

There seems to be a problem with advanced sequencer. I used it a year ago or something, and now wanted to try it again. However it won't run when I press START/STOP button, but rather seems to enter the editing mode, where STEP and START/STOP buttons move me back and forth one step. Pressing WRITE button leaves this mode.

I am sure I have set all the parameters correctly, like Global Parameter 43 to 16 and another one that sets internal clock for sequence operation.

Any ideas?

Regards
Tim