On Wed, Jun 26, 2013 at 12:35:48PM -0000, benoitdmx wrote:
> Hello guys,
>
> I started some investigations on the EX800 firmware, and I tried to disassemble the binary file located in the Files section (EX800 firmware)
>
> As far as I can see, the file is corrupted : the first bytes are 06 B9 for address 0x0000 (the reset vector). And there are no instructions with 0x06 prefix in the 8085.
>
> I will try to compare the file with the EPROM content in my EX800, but if somebody already made another dump and can compare it too...
>
> Benoit
Isn't the CPU little-endian, making that address $B906 and therefore quite firmly in the ROM map?
I know the EX800 image from the files section works because that's what I use in my Poly...
--
Gordonjcp MM0YEQ