From a while ago...
I also should add that I am going to change P2-13 and P2-14 to combine them into P2-14. So you should write your controllers in such a way that lends them to easy modification.
--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> Well, here is the raw format of the data. See the MIDI implementation for the
> precise format of the sysex message.
>
> In order, from patch byte 0 through to patch byte 127 (which takes two bytes
> each in the patch sysex dump itself).
>
> The left hand is the maximum value for the parameter. If you exceed the value
> then when the patch is selected the parameter that has the invalid value will be
> set to half of the maximum for that parameter.
>
> Let me know if you have any questions at all.
>
> 2 , 11 DCO1 Octave
> 1 , 12 DCO1 Waveform
> 15 , 13 DCO1 harmonics
> 12 , 14 DCO1 harmonic modulator waveform
> 3 , 15 DCO1 harmonic modulator source
> 15 , 16 DCO1 harmonic modulator depth
> 31 , 17 DCO1 Level
> 1 , 18 DCO mode single or double
> 2 , 21 DCO2 Octave
> 1 , 22 DCO2 Waveform
> 15 , 23 DCO2 harmonics
> 12 , 24 DCO2 harmonic modulator waveform
> 3 , 25 DCO2 harmonic modulator source
> 15 , 26 DCO2 harmonic modulator depth
> 31 , 27 DCO2 Level
> 0 , 28 Not used
> 12 , 31 Interval
> 3 , 32 Detune
> 15 , 33 Noise
> 99 , 34 Delay Time
> 15 , 35 Delay Feedback
> 31 , 36 Delay Modulation Frequency
> 31 , 37 Delay Modulation Intensity
> 15 , 38 Delay Effect Level
> 99 , 41 VCF cut off
> 2 , 42 Keyboard Track
> 1 , 43 Polarity
> 15 , 44 EG3 VCF cutoff influence
> 1 , 45 EG3 Trigger
> 12 , 46 EQ treble
> 12 , 47 EQ bass
> 1 , 48 Chorus
> 31 , 51 EG1 Attack
> 31 , 52 EG1 Decay
> 31 , 53 EG1 Break Point
> 31 , 54 EG1 Slope
> 31 , 55 EG1 Sustain
> 31 , 56 EG1 Release
> 0 , 57 Not used
> 0 , 58 Not used
> 31 , 61 EG2 Attack
> 31 , 62 EG2 Decay
> 31 , 63 EG2 Break Point
> 31 , 64 EG2 Slope
> 31 , 65 EG2 Sustain
> 31 , 66 EG2 Release
> 0 , 67 Not used
> 0 , 68 Not used
> 31 , 71 EG3 Attack
> 31 , 72 EG3 Decay
> 31 , 73 EG3 Break Point
> 31 , 74 EG3 Slope
> 31 , 75 EG3 Sustain
> 31 , 76 EG3 Release
> 0 , 77 Not used
> 0 , 78 Not used
> 4 , 81 Velocity operator 1 intensity
> 1 , 82 Velocity operator 1 invert
> 11 , 83 Velocity operator 1 target
> 4 , 84 Velocity operator 2 intensity
> 1 , 85 Velocity operator 2 invert
> 11 , 86 Velocity operator 2 target
> 6 , 87 VCF velocity sensitive intensity
> 5 , 88 VCF velocity sensitive response shape
>
> 15 , 11 LFO1 frequency
> 15 , 12 LFO1 delay
> 1 , 13 LFO1 free running
> 1 , 14 LFO1 delay type
> 62 , 15 LFO1 square wave PWM ratio
> 12 , 16 LFO3 waveform select
> 15 , 17 LFO3 modulation depth of SLFO1
> 0 , 18 Not used
> 15 , 21 LFO2 frequency
> 15 , 22 LFO2 delay
> 1 , 23 LFO2 free running
> 1 , 24 LFO2 delay type
> 62 , 25 LFO2 square wave PWM ratio
> 12 , 26 LFO3 waveform select
> 15 , 27 LFO3 modulation depth of SLFO2
> 63 , 28 LFO2 sync driven 0=original oscillator, 1-63 sequencer clock
> driven
> 12 , 31 DCO MG 1st modulator waveform
> 3 , 32 DCO MG 1st modulator source
> 15 , 33 DCO MG 1st modulator depth
> 0 , 34 Not used
> 1 , 35 DCO MG EG invert
> 15 , 36 DCO MG EG depth
> 0 , 37 unused
> 2 , 38 DCO MG mode
> 12 , 41 VCF MG 1st modulator waveform
> 3 , 42 VCF MG 1st modulator source
> 15 , 43 VCF MG 1st modulator depth
> 12 , 44 VCF MG 2nd modulator waveform
> 3 , 45 VCF MG 2nd modulator source
> 15 , 46 VCF MG 2nd modulator depth
> 0 , 47 unused
> 1 , 48 12/24db filter cutoff select
> 99 , 51 Resonance set point
> 12 , 52 Resonance MG waveform
> 3 , 53 Resonance MG source
> 15 , 54 Resonance MG depth
> 0 , 55 Not used
> 15 , 56 Resonance EG depth
> 1 , 57 Resonance EG invert
> 1 , 58 Resonance mode
> 99 , 61 FM-800 set point
> 12 , 62 FM-800 MG waveform
> 3 , 63 FM-800 MG source
> 15 , 64 FM-800 MG depth
> 0 , Not used
> 15 , 66 FM-800 EG depth
> 1 , 67 FM-800 EG invert
> 2 , 68 Noise mode
> 15 , 71 SLFO3 frequency
> 62 , 72 SLFO3 square wave PWM ratio
> 1 , 73 SLFO3 free running
> 98 , 74 sequencer clock random sample and hold increment
> 15 , 75 SLFO4 frequency
> 62 , 76 SLFO4 square wave PWM ratio
> 1 , 77 SLFO4 free running
> 31 , 78 sustain decay and release EG offset
> 2 , 81 DCO1 tremolo off, LFO1/2 select
> 15 , 82 DCO1 tremolo depth
> 2 , 83 DCO2 tremolo off, LFO1/2 select
> 15 , 84 DCO2 tremolo depth
> 63 , 85 Bend depth
> 63 , 86 Portamento slide rate
> 0 , 87 unused
> 3 , 88 Operating Poly Mode
>
>
> All parameter values start at zero. For example, waveform is displayed as 1 or
> 2 but is stored as 0 or 1. This applies to all parameters that start at one.
> They are in fact stored as one less than the display shows.
>
> Please also keep in mind that I plan to rewrite the sysex patch dumps so that
> they use a single MIDI byte instead of two per value. However, when I do that,
> I will use a new sysex message ID number so that the existing patch dump sysex
> commands still work.
>
> Ask as many questions as you wish.
>
> Mike
>
>
>
> ________________________________
> From: tim.tashpulatov <tim.tashpulatov@...>
> To: korgpolyex@yahoogroups.com
> Sent: Tue, November 30, 2010 2:25:07 AM
> Subject: [korgpolyex] HAWK-800 Sysex Patch Dump format
>
>
> Mike,
>
> Could you please shed some light on Hawk-800's patch dump format? I am thinking
> of some external way to tweak patch parameters and to send changes back via
> sysex.
>
> Regards
> Tim
>