Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] Re: New Power Adaptor for Poly 800 and question about multi mods (Hawk)

From: Martin Ator <cyllall@...>
Date: 2012-10-05

I would advise against using any power supply that has removable tips enabling reversal of the polarity. This is a disaster waiting to happen. 1 split second of absent mindedness will fry components inside your Poly. You might decide to test something else and swap polarity and then forget to change it back again.

Just search on ebay for Roland TR-606 power supply and see what you can find. Something with a permanently set polarity is safer. Stick a label with Poly-800 only written on it to the power supply if you must.

These power supplies are usually all switched mode ones of at least 500ma.

Remember CENTRE/CENTER NEGATIVE.


From: backshall1 <backshall1@...>
To: korgpolyex@yahoogroups.com
Sent: Friday, 5 October 2012, 2:06
Subject: RE: [korgpolyex] Re: New Power Adaptor for Poly 800 and question about multi mods (Hawk)

 
I’ve been using 300ma for years. Noproblem. The only thing that is really critical is that it has to have thecenter pin NEGATIVE. This is backwards from most AC adapters, but fairly normalfor a lot of Korg and Roland products. The size is hard to measure but Ibelieve it is a standard 5.5mm outside, 2.5mm inside diameter.
 
Don B.
 

From: korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of bodhi_light
Sent: Thursday, October 04, 20128:38 PM
To: korgpolyex@yahoogroups.com
Subject: [korgpolyex] Re: NewPower Adaptor for Poly 800 and question about multi mods (Hawk)
 
 
So 300ma is good? I saw 800 there as well. Also theadapters at radio shack have adjustable tips. Which on do I need? I'd prefernot to schlep the Korg there. Thanks again. This is a helpful group!

--- In korgpolyex@yahoogroups.com,"bimmerfan222" <bperkins211@...> wrote:
>
>
>
>
> I've been using a radio Shack 300mA supply on my korg for the last year
without any problems.
> But I would agree that having at least 500mA would be preferrable.
>
> there are 1A 9v adapters on ebay everyday for about 5 dollars shipped... I
may have to invest in one and upgrade mine.
>
>
> - Blaine
>
>
>
> --- In korgpolyex@yahoogroups.com,
Michael Hawkins <korgpolyex800@> wrote:
> >
> > Holy moly! My bad, I meant to say 600mA. But you're right that 1Amp
is really the right size for it.
> >
> > Mike
> >
> >
> >
> > ________________________________
> > From: Gordon JC Pearce <gordon@>
> > To: korgpolyex@yahoogroups.com
> > Sent: Tuesday, October 2, 2012 1:05 PM
> > Subject: Re: [korgpolyex] New Power Adaptor for Poly 800 and question
about multi mods (Hawk)
> >
> >
> >  
> > On 02/10/12 13:48, Michael Hawkins wrote:
> > >
> > >
> > > You will need a 9V DC 300mA power adapter.
> >
> > 300mA doesn't really sound like enough; mine draws a good 650mA when
> > it's running. The PSU that came with it is rated at 1A, but failed
some
> > time ago. I now use it with a 1.5A PSU because that was what I had
> > kicking about ;-)
> >
> > --
> > Gordon JC Pearce MM0YEQ
> >
>