| previous by date | index | next by date |
| previous in topic | topic list | next in topic |
Are you going to add the new instructionsto http://launch.groups.yahoo.com/group/korgpolyex/files/4%29%20Modifications/HAWK-800%20upgrade%20kit/Documentation/as well? Seems like our group files should also be kept up to date.
Don B.
From: korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of Michael Hawkins
Sent: Tuesday, July 10, 2012 9:35AM
To: korgpolyex@yahoogroups.com
Subject: Re: [korgpolyex] wheredoes the 4th capacitor go on boards version 1.5b
Yeah because I have been so busy with actually making money that Ididn't get time to post the updated instructions.
I have already created the instructions, I just haven't postedthem on sourceforge yet.
Mike
From: backshall1<backshall1@...>
To: korgpolyex@yahoogroups.com
Sent: Tuesday, July 10, 2012 9:19AM
Subject: RE: [korgpolyex] wheredoes the 4th capacitor go on boards version 1.5b
Oops, so that link I justposted is not valid for v1.5.b? Sorry about that.
Don B.
From: korgpolyex@yahoogroups.com [mailto: korgpolyex@yahoogroups.com ] On Behalf Of Michael Hawkins
Sent: Tuesday, July 10, 2012 9:13AM
To: korgpolyex@yahoogroups.com
Subject: Re: [korgpolyex] wheredoes the 4th capacitor go on boards version 1.5b
John,
I may have been slow to ship out the kits but other than that, howhas this been a "really shit deal"?
The capacitor goes up in the far upper right hand corner. Rightnext to the ten pin 2x5 pin connector labelled "AtomaHawk".
Yes, the instructions are slightly out of date. But I did updatethem and they will be posted at sourceforge tonight. And yes, the onlydifference between 1.5 and 1.5b is the different cap position which I mentionedabove.
Mike
From: jcmayer3000<johnnymayer@...>
To: korgpolyex@yahoogroups.com
Sent: Monday, July 9, 2012 11:21PM
Subject: [korgpolyex] where doesthe 4th capacitor go on boards version 1.5b
TO MICHAEL:
this has been a really shit deal for me.
your instructions are terrible.
and you're also a turd.
where does the 4th capacitor go on the boards labeled version 1.5b near the74HC174 chip? there's a total of about 11 points that it could be plugged into.
an immediate response would be most helpful.