Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [korgpolyex] where does the 4th capacitor go on boards version 1.5b

From: Michael Hawkins <korgpolyex800@...>
Date: 2012-07-10

John,

I may have been slow to ship out the kits but other than that, how has this been a "really shit deal"?

The capacitor goes up in the far upper right hand corner. Right next to the ten pin 2x5 pin connector labelled "AtomaHawk".

Yes, the instructions are slightly out of date. But I did update them and they will be posted at sourceforge tonight. And yes, the only difference between 1.5 and 1.5b is the different cap position which I mentioned above.

Mike

From: jcmayer3000 <johnnymayer@...>
To: korgpolyex@yahoogroups.com
Sent: Monday, July 9, 2012 11:21 PM
Subject: [korgpolyex] where does the 4th capacitor go on boards version 1.5b

 
TO MICHAEL:

this has been a really shit deal for me.

your instructions are terrible.

and you're also a turd.

where does the 4th capacitor go on the boards labeled version 1.5b near the 74HC174 chip? there's a total of about 11 points that it could be plugged into.

an immediate response would be most helpful.