Subject: Re: [korgpolyex] Re: External Audio in Mod.
From: billmeirelles@... Date: 2011-07-19
Only if the pot value is too small, than the ground will leak and you will loose signal power, if you are using a 50k or bigger it should be ok, I do prefere B 50k linear pots instead of log audio taper, the response is much smoother. Also I do put a general porpouse diode bettween the cutoff pot's positive out (middle terminal) and the pcb to prevent short circuit and signal loss. The diode could be an 1N4148, very easy to find.
Em 18/07/2011 21:37, 7yash < josh.nursing@... > escreveu:
Tried the Moog Slayer pot mod with pots I had in hand. If I use a smaller pot resistance value, it's normal that I get a low range, right?