Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

previous by date index next by date
  topic list next in topic

Subject: P1 14 parameter values 12 and 13

From: "tim.tashpulatov" <tim.tashpulatov@...>
Date: 2010-11-22

Hello all,

Now that I've assembled and installed the HAWK-800 kit, I am learing my renewed Poly-800.

When playing with P1 14 parameter (DCO harmonics modulation waveform selector) I can see there are two values, 12 and 13, not covered in the manual. I guess the manual is slightly out of sync with the latest firmware 2.4.6. What are these values?

The manual also says P1 45 can be 0-1, while it in fact can be 1-2, this must be just a typo.

Once again Mike, thanks a lot for the awesome work you have done with HAWK-800 and accompanying documentation.

Regards
Tim