hi Frequency Spectrum,
thanks for your response. i´ll take the poly to a technician. wont touch that anymore.
thanks again for your reply.
--- In korgpolyex@yahoogroups.com, Frequency Spectrum <freqspec@...> wrote:
>
> Sounds to me like one of the wires has touched something it shouldnt have
> blowing something else.
> you will need to check everything within reachable are of the wires that
> came loose with a voltage tester
> or scope. You will need schematics to determine the values of each
> component.
> If you are unsure of how to do this dont attempt it as you could do more
> damage
>
>
>
> On Thu, Jul 16, 2009 at 5:07 AM, hondurasllanos <gladkazuka@...>wrote:
>
> >
> >
> > hello,
> > first of all, thanks for all the information you korgpolyex group have
> > posted here. it is been very helpful.
> >
> > my problem is related with moog slayer mod.
> > i have the mkII model. my skills in soldering are rather pour. althow i did
> > try to make it and it worked. but after some weeks some wires got
> > disconnected. i try to fix them again but the moog slayer didn't work
> > anymore. instead i got a distorted noise from my poly, and parameters like
> > resonance (32) doesn't work even with the - + buttons.
> > what could be wrong?
> > i double checked connections and everything seems to be right in place.
> >
> > sorry for my english, and thank you very much.
> >
> >
> >
>