Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

IIRC it was one of the first patches I made after the cut/rez mod somewhere back in 2001. The filter resonance was set near self-oscillation, and I was twiddling with cutoff knob during the sequence.

I'll try to find a chart with that patch (I used to write down every single patch back then), and post it here. If not, I'll dust off my Poly and if there were no problems with  memory (I guess it wasn't turned on for like 2 years now), I'll write the numbers down again :-)

Cheers.

Ok that is a great snippet.

I am assuming that you did this with the Moog Slayer mods in place - right?

If not, how did you control the filter? Or were you just using the keypad to change parameters the hard way?

Mike

---

From: Piotr P <xelectric123@ wp.pl>
To: korgpolyex <korgpolyex@yahoogro ups.com>
Sent: Wednesday, November 12, 2008 3:58:18 AM
Subject: Re: [korgpolyex] Hawk-800 Feature Idea

In the subject of 303-ish Poly-800 some time ago I've made a patch that works pretty good in terms of emulating squelchy distorted 303-ish sound:

http://xelectric. republika. pl/poly303. mp3

It's sequenced through Techno Toys Seq-303 + small delay applied on the audio output.



------------ --------- --------- --------- --------- ----
Sylwester pod palmami!
Egipt już od 1672 zł.
Sprawdź nasze propozycje.
http://klik. wp.pl/?adr= http://wycieczki .wp.pl&sid=551

----------------------------------------------------
Oto ostrzeżenie od Twojego Słoneczka ! - Kliknij:
http://klik.wp.pl/?adr=http://corto.www.wp.pl/as/prorocznia2.html&sid=554