Hmm actually I was loading a EX-800 factory bank-lights flashed, midi
ox progress bar went fine. Pretty much assumed all went well. Went to
send a small bank of some user patches for the EX and nothing seems
to change.
So I ∗may∗ have been 100 percent wrong to assume...
the data dump for the EX is F0 42 21 01 10 F7
(see
http://www.geocities.com/sunsetstrip/studio/3507/ex800info2.html)----- In
korgpolyex@yahoogroups.com, "Frequency Spectrum"
<freqspec@...> wrote:
>
> Thanks ill let you know how i go.
> Im gona buy the bits for the slayer mod. you can get them from digi
key or
> farnell for pennies.
> well worth doing
> good luck
>
> On Wed, Oct 29, 2008 at 7:37 PM, april exe <april.exe@...> wrote:
>
> > Yep, infact you likely only have to set it up for output to the
Korg, I
> > dont think the Korg talks back to Midi ox although Im sure it
will. Ive
> > hardly gotten into it the manual . Still setting up a Mirage-
which is a bit
> > of a challenge to say the least. Today Ill go by our town freebox
to see if
> > I can find something with knobs to do the Korg filter mod :)
> >
> > I dont recall them all but there ∗are∗ some settings in midi ox
that have
> > to be applied and it took some trial and error the first time I
used it with
> > an Emu Orbit- I think "pass sysex" is the most important one but
there are
> > some buffer settings in there as well.
> >
> > Im off work the next 3 days, Ill try and get some patches up. Im
hoping to
> > "emulate" some polysix sounds as best as the EX will do at least.
I can hear
> > it a "little" bit in the presets...a "little" --well see-
> >
> > Have fun:)
> >
> >
> >
> > april.exe
> > email april.exe@...
> > <http://hotmail.com/>website http://april.exe.tripod.com
> > myspace www.myspace.com/aprilexe
> >
> >
> >
> > ------------------------------
> > To: korgpolyex@yahoogroups.com
> > From: freqspec@...
> > Date: Wed, 29 Oct 2008 17:25:04 +0000
> > Subject: Re: [korgpolyex] Re: new to the world of poly 800 mk2
> >
> > so you just plugged in midi cables and dumped the sysex from
midi ox?
> >
> >
> >
> > On Wed, Oct 29, 2008 at 3:27 PM, icr2fan <april.exe@...> wrote:
> >
> > Hi, My EX-800 Came yesterday and I had no trouble with MIDI-Ox,
my usb
> > interface and factory sysex.
> >
> > No special settings were needed. Seemed to load right up.
> >
> > 01-windows MIDI default is the M Audio UNO interface but when
using my
> > Korg TR driver as default and using the UNO w my Ensoniq SQ80
theres no
> > trouble. Think the MIDI-Ox setting is what counts here.
> >
> > 02- In MIDI-Ox UNO is set for in and out with my controller added
to
> > the in as well
> >
> > 03- will depend on what app your using but in MIDI-Ox you load the
> > sysex file and hir send.
> >
> > As far as Ive seen the EX and Poly800MKII should be the same in
this
> > regard. Good luck. Seems like a pretty good OSC/Filt combo in
there.
> >
> > --- In korgpolyex@yahoogroups.com, "mark" <freqspec@> wrote:
> > >
> > > i have the sysex original midi patch for my poly 800mk2, a
computer
> > and
> > > midi data send software. Can anyone tell me step by step what i
need
> > to
> > > do so that the korg goes into receive mode so i can send the
data to
> > it.
> > > Thanks
> > > Newbie Mark
> > >
> >
> >
> >
> >
> >
> > ------------------------------
> > You live life beyond your PC. So now Windows goes beyond your PC.
See how<
http://clk.atdmt.com/MRT/go/115298556/direct/01/>
> >
> >
> >
>