OK, after spending quite a few hours pulling my hair out I finally got
the LFO rate modulation working with different waveforms. Now you can
modulate the rate of both LFO's from the SLFO's and apply different
waveforms. Triangle, sawtooth, sine, square with PWM and random are
all available.
Now, onto FM-800 and resonance modulation and EG follow.
Mike
--- In
korgpolyex@yahoogroups.com, "korgpolyex800" <korgpolyex800@...>
wrote:
>
> OK,
>
> I may have mentioned this before but... I have been playing with the
> LFO rate variation over the weekend and it is very nice indeed.
>
> In short, the two SLFO's (LFO3 and 4) can be routed to either LFO1 or
> LFO2 to vary their rate. And you do this with a depth value of 00-15.
> Zero means no rate variation and 15 means full. It's very nice to hear
> the rate of the LFO's modulate against the SLFO's.
>
> The waveform from the SLFO applied to the rate of the LFO is the SLFO
> triangle waveform. I am looking into using the other waveforms. I am
> thinking that square PWM would be really cool when modulating the
> rates of the LFO's.
>
> Mike
>