Hi Mike,
parameter editing display looks (and works) just fine for me. Nice work!
I tested with Edirol digital mixer (M-16DX) configured as control
surface. MIDI-OX Data Mapping function was used as the router.
So, I would only want the displayed parameter values to be limited to
max 99, since now when I send the controller value greater than 99 the
display shows P0, P1, etc. But this is not a problem at all since I
can translate the values from 0-127 to 0-99 in MIDI-OX Data Mapping.
Best, Saulius
--- In
korgpolyex@yahoogroups.com, "korgpolyex800" <korgpolyex800@...>
wrote:
>
> For those of you who have the HAWK-800 kit, I've uploaded the latest
> firmware files into the files section on this discussion group.
>
> This BETA firmware will allow you to look at the way the displays
> behave when receiving MIDI controller parameter editing messages. Send
> messages on controllers 22 through to 30 to see the displays change.
>
> I would very much appreciate feedback from at least some of you. This
> is because it took a great deal of work to get the displays to work as
> they do now and if there are any changes that you would like to
> suggest regarding the display behavior then now will be the time to
> let me know. Otherwise, if I go too far down this track it will be
> very hard to make any changes.
>
> Please do download this firmware and let me know what you think.
>
> And please, backup your patches first.
>
> Mike.
>