Yeah, I think that might be doable. I look into it.
--- In korgpolyex@yahoogroups.com, "David Mochen" <davidmochen@...> wrote:
>
> Great news, Mike. I wonder if we will be able to set up the pitch
bend range on a patch per patch basis -- the slider is a drag to use
:). Of course, a global setting could be usable as well, the idea
being to avoid the very hard-to-calibrate slider and have a numeric
storable value instead.
>
> thnx
>
> Dave
>
> ----- Original Message -----
> From: korgpolyex800
> To: korgpolyex@yahoogroups.com
> Sent: Wednesday, January 16, 2008 11:18 AM
> Subject: [korgpolyex] Re: Poly fans - need a little help
>
>
> Great! That sounds exactly the same as what my Poly is doing although
> there is a slight detune at the high maximum but I know what that is
> being caused by.
>
> Last night I also got into the DCO and VCF MG using the Y axis on the
> joystick and got close to making it work too.
>
> Progress - slow but steady.
>
> Mike.
>
> --- In korgpolyex@yahoogroups.com, "David Mochen" <davidmochen@>
wrote:
> >
> > Hi there Mike
> >
> > Yes, on my Poly 800 (and a couple others I've had the chance to play
> with during these years) the pitch bend range is a fifth up and down
> (actually a little bit more with the slider all the way up).
> >
> > dave
> >
> >
> > ----- Original Message -----
> > From: korgpolyex800
> > To: korgpolyex@yahoogroups.com
> > Sent: Tuesday, January 15, 2008 11:07 PM
> > Subject: [korgpolyex] Poly fans - need a little help
> >
> >
> > Hi Poly fans,
> >
> > I need a little help to confirm that the joystick code I've
written is
> > working correctly. Since I don't have a working original Poly 800, I
> > need to understand the pitch bend range.
> >
> > The pitch bend range I've implemented in my new joystick bend
code is
> > between 7 and 8 semitones up or down. This means that on a Poly 800
> > with the bend pot at maximum, I am able to bend C up to somewhere
> > between G and A and I am able to bend down C down to just slightly
> > below F.
> >
> > I need to know if that is how the original Poly 800 bends.
> >
> > Can someone help me confirm this? It would be very much
appreciated.
> >
> > Regardless, the original pitch bend joystick function is almost
(or is
> > exactly) as the original Poly 800 was. Next I move on to the VCF MG
> > and DCO MG (Y joystick) functions.
> >
> > Once those are as close to the original as possible, I will move
onto
> > new joystick controllers. Woohoo!
> >
> > Mike.
> >
>