Hi Erik,
I am aiming for the hardware kit to be available no later than December.
As far as the firmware goes, it will definitely have the sysex
enhancements as well as the global parameters. Less certain is how
much of the additional EG and MG functions will exist in the initial
firmware. At this point, I've not completed hacking that part of the
code so it is a little less certain whether I'll have new EG's etc by
the time the hardware kit comes out.
Mike.
--- In korgpolyex@yahoogroups.com, "Erik Hines" <sablerock@...> wrote:
>
> Realistically, when do you think the mod kit will be avail for beta
> release?
>
> Erik
>
> --- In korgpolyex@yahoogroups.com, "korgpolyex800"
> <korgpolyex800@> wrote:
> >
> > Hi Erik,
> >
> > Yes, the mod kit is going to include a couple of digital
> > potentiometers that will be under the control of MG's or EG's.
> >
> > And yes, I think having a couple of selectable sequences to choose
> > from is a great idea too.
> >
> > And yes, I hope to put in the 12/24 db switch as well.
> >
> > But initially, the kit will probably come out without all of these
> > things. The good news is that the EEPROM's are programmable and I
> have
> > already written the software to convert the machine code into
> sysex.
> > And I already have the code written and working that allows you to
> > download new firmware to the EEPROM's. So as each new function is
> > developed and tested, anyone who has the mod kit will be able to
> > download new firmware and upgrade their Poly.
> >
> > So the question is really, which new functions will come out with
> the
> > mod kit first?
> >
> > Mike H.
> >
> > --- In korgpolyex@yahoogroups.com, "Erik Hines" <sablerock@> wrote:
> > >
> > > At first glance, I thought 'wow, 4 addl banks of 64?!, I'd never
> > > fill all those up.'. Considering that there will be new
> parameters
> > > available for editing, those banks could be useful. How about
> > > dedicating one bank to sequence banks (allowing multiple
> sequences
> > > to be stored in memory) I personally dont use the sequencer at
> all,
> > > but I might use it more often if I can store multiple sequences
> and
> > > access them via program change or other 'on the fly method'.
> > >
> > > Refresh me, will the mod be able to take advantage of any of
> the
> > > hardware mods (i.e. Moog SLayer and FM mod?) If so, I guarantee
> > > those banks will get filled!!! Also, what's the possibility of
> > > adding addl' filter features (i.E Bandpass, 12\24 LPF, peak.) I
> > > remeber that there were addl envelopes that were possibly going
> to
> > > be implemented as well (Panning envelope or Random pan a
> > > possibility?) Just a few things to think about...
> > >
> > > Erik
> > >
> > > --- In korgpolyex@yahoogroups.com, Michael Hawkins
> > > <korgpolyex800@> wrote:
> > > >
> > > > Hi Poly fans,
> > > >
> > > > Here's another little software progress update for today.
> > > >
> > > > I've completed the guts of the global mode code. You press the
> > > step key to get into global mode. You are then presented with 11
> GL
> > > 11 on the display. You then use the numeric keypad to select the
> > > desired global parameter and use the up down buttons to set the
> > > value. There are potentially 64 different global parameters.
> Global
> > > 11 is an important one because it is used to execute specific
> > > commands (up to 63 commands are possible). The command that you
> > > execute is determined by the data value of global parameter 11.
> > > Current planned commands are:
> > > >
> > > > 11 - No Operation
> > > > 12 - All Notes Off - (for those panic stuck note situations)
> > > > 13 - Sysex dump all operating patches
> > > > 14 - Sysex dump sequencer data
> > > > 15 - Sysex dump single patch from operating bank
> > > > 16 - Sysex dump all patches from selected patch bank
> > > > 17 - Sysex dump single patch from selected patch bank
> > > > 18 - Sysex dump all patches from all banks
> > > > 21 - Copy operating bank to selected bank
> > > > 22 - Copy selected bank to operating bank
> > > > 23 - Copy current operating patch to selected patch in
> selected
> > > bank
> > > > 24 - Copy selected patch in selected bank to current operating
> > > patch
> > > >
> > > > To execute a command, you select global parameter 11 then set
> the
> > > parameter value to the desired (as table above shows) command
> number
> > > and then press the write key to execute it.
> > > >
> > > > Then, the current global parameters for controlling the
> function
> > > of the EX800 are as follows:
> > > >
> > > > 21 - Omni On, Off/auto - The module will come up with omni off
> > > when set to off here, 0 or 1
> > > > 22 - Keyboard MIDI TX channel - 0=off, 1-16 is TX channel
> > > > 23 - Joystick MIDI TX channel - 0=off, 1-16 is TX channel
> > > > 24 - Local keyboard control on off - 0 or 1
> > > > 25 - Local joystick control on off - 0 or 1
> > > > 26 - Sequencer MIDI TX channel - 0=off, 1-16 is TX channel
> > > > 27 - Joystick X axis MSB assigned CC change number - 0-63
> > > > 28 - Joystick Y axis MSB assigned CC change number - 0 - 63
> > > >
> > > > 31 - Extended playing range on off - 0 or 1
> > > >
> > > > Now you can see I have already started allocating various
> globals
> > > that will be used with the Poly 800 (for joystick and keyboard
> for
> > > example) and the only executable global I have working as of
> right
> > > now is the All Notes Off command (which I just got working last
> > > night) but you get the idea. Also, you may have noticed that
> some of
> > > the commands mention the "operating" patch bank and
> the "selected
> > > patch bank". This is referring to the four additional banks of
> > > patches that I envisage will be available when I write the
> software
> > > to support them. The question is, who of us really needs another
> > > four banks of 64 patches? Or is that just plain overkill for
> this
> > > instrument?
> > > >
> > > > Mike H.
> > > >
> > > >
> > > > ---------------------------------
> > > > Choose the right car based on your needs. Check out Yahoo!
> Autos
> > > new Car Finder tool.
> > > >
> > >
> >
>