> Subject: Re: How can I connect my Poly 800 to my pc?
One thing you might want to check is which cable you are connecting to which
port - on my MIDI cable, the "IN" cable is actually MIDI IN TO THE PC - ie.,
it goes in the MIDI OUT on the poly. Might just want to check how yours is
set up.
Oh yeah, none of my photos of my poly800 have turned out - didn't realise
untill much later that I was using an "outdoor use only" disposable camera,
thought I had plenty of light, obviously not... I even managed to line the
beasty up next to a Nord Lead 2 (hehe, colours are identical...), but alas I
won't have that chance again...
Shall try to get a "proper" camera and rip off a roll...
On another note, anyone know exactly what happens in the "stereo" phase of
the poly? As far as I know it only has a single signal line most of the way
through, so I assume there's some sort of "stereoification" stage? I was
thinking about patching out before this phase, going through a delay (or any
other mono processor), then continuing through the rest, so as not to lose
the stereo?
cya
LM
http://www.baudalign.com