| previous by date | index | next by date |
| previous in topic | topic list | next in topic |
Joseph C. Smith
Product Manager
Powerhouse Mechanical Repair, Inc.
T (704) 523-5265
F (704) 523-6583
M (704) 651-9952
visit us at www.powerhousemechanical.com
-----Oorspronkelijk bericht-----
Van: korgpolyex@yahoogro ups.com [mailto:korgpolyex@ yahoogroups. com]Namens radek_tymecki
Verzonden: donderdag 29 maart 2007 0:08
Aan: korgpolyex@yahoogro ups.com
Onderwerp: [korgpolyex] Re: Mod questions:)
I've found some more infos about mods... Anyone can try em?
1.
"It seems that the most flexible way of Modifying the 12db/24db filter
capabilities would be to add direct output jacks for each of the two
filter
modes
+ one audio input jack into the chorus unit. This, I think, would be
the most
non-limiting mod you could do."
2.
"Another worthwhile mod (while on the subject), would be to add an On/Off
switch to turn the Noise Gate into bypass mode. I've found that the
Noise Gate
(Which is FET "F1" on the KLM-598 board), can indroduce a slight click
when
it switches + it seemed to be that it cut off the tails of the "Release
envelopes".
To add the bypass switch, use a SPST toggle switch to open/close a
connection between Transistor "DTA1" emitter & collector pin (One will
be the
middle pin of the transistor the other will connect to Resistor "R19"."
3.
"Also, If you've added the VCF Audio Input mod I posted, here's a cool
trick.
While monitoring from the headphone output, patch one of the Poly-800's
Line Outs back into the VCF audio Input. What this does is setup a Voltage
Controlled feedback loop, IE. Envelope 3 will control the feedback level.
So Imagine you set up Envelope 3 with a long Attack + Long Release
Envelope, when you hit a note, both resonance + Chorus feedback will
fade in
with the Attack, release the note and it fades out... Pretty nice
patch, you
have
to tweak the onboard resonance + the master volume knob to get useable
results, but once you found it, it's a beautiful sound."