patrioticduo wrote:
> Manu,
>
> The EPROM programmer is a very old Sunshine (Chinese) unit.
> The Compaq Presario is a very old Pentium-M class.
>
> The Poly 800 and EX800 run 80C85 CPU.
>
> The disassembler comes from http://www.datarescue.com/
>
> I will post the EX800 EPROM binary file onto my new web site over the
> next couple of days. The disassembled code is still too primitive to
> do anything with so I will hold off posting that until I've made some
> more progress.
Hi Mike,
Many years ago I spent quite a bit of time programming embedded systems
using the 8085. Being a packrat, I know that all the documentation is
around here, somewhere. When I find it we can figure out a way to get
you copies. I know that Intel's documentation is available in electronic
format somewhere on the web, I ran across it when I found my old 8085
SDK board. I'll look again and see if I can find it.
This sounds like fun... I've always wished for sysex or NRPN type remote
control over the various parameters<G>!
Bill
Audio Enterprise
www.audioenterprise.com
Providing Technical Services to Audio Professionals
and Creative Music and Audio Services to everyone
KB3KJF
--
I need to find something clever to put here!
==