Thanks for the info and the patchsheets:)Although I figured out D2
for my self 10 mins after posting I used a 1n4000.I know all there is
to know about diodes now:).I still can't get it to work. No power
from the adaptor and the headphone jack doesnt work either. It still
works fine with batteries;. Any suggestions?.
Damn wish I could find my multtimeter.
--- In korgpolyex@y..., ">>>marjan<<<" <urekar.m@e...> wrote:
>
> It's not critical part, you can use any rectifier diode you find,
> from 1N400x family (1N4001,1N4004...), but _do not_ use small
> signal diodes like 1N4148. It's in there to protect the circuit
> from wrong _polarity_ (not voltage) by coducting. You obviously
> applied wrong polarity. It should have survived (that's why
> you should use stronger diode).
>
> > Could you please tell me the value of D2 for the poly 800 , I
fried
> > the diode using the wrong adaptor. The schematics arent much
help , I
> > cant read the value . I think it says S R 1K but I could be
wrong .
> > The synth still works with the batteries . Unforttunatly it
refuses
> > to accept patch loading , something to do with the blown diode I
> > think. Anyway thanks in advance.
>
>
>
> --
>
>
>
> marjan
>
>
> me : Marjan Urekar
> e-mail: urekar.m@e...
> s-diy : http://surf.to/marjansystems
> music : http://go.to/forcemajeure