Archive of the former Yahoo!Groups mailing list: Korg Poly800/EX800 Users

Or you could also solder on some potentiometers (knobs) onto these pots (VR1 and VR4) so you can tune it. Just be sure to use a tuner for accuracy. This way you wont have to open up your case everytime you want to make an adjustment.  lanrosta

zwitter_tier <zwitter_tier@...> wrote:

--- In korgpolyex@yahoogroups.com, "genesisjoe2001" <caludaj@c...>
wrote:
>
> I am playing in a band in which the guitar players are tuning down
a
> half-step to accomodate the singer.
> My other synths have tranpose buttons which the Poly 800 does not.
> The tuning slider on the Poly 800 does not go down a full half-
step.
> Is there another adjustment that can be made to get the Poly down
an
> entire half-step.
> Thanks in advance for any help.
> Joe

open up your poly, and on the main board, look for VR1 and VR4, two
little white knobbies.  run the keyboard through a tuner, and mess
with those guys till you get it how you want it.  i believe VR1 is
coarse and VR4 is fine tune.