It doesnt look like you could, there's 8 outputs from the DCO chip (as
in the schematic) however they are labeled 2' 4' 8' 16' 1 and 2
the closest you could probably get to individual outs is one output
for each pack of 4 DCO's :(
--- In
korgpolyex@yahoogroups.com, "wagstoriches2000"
<wagstoriches2000@y...> wrote:
> Hello all! I just found a poly 800 on the side of the road and
> brought it back to my house. After firing it up, I was delighted to
> find that it worked. I promptly did the filter mod and got to
> thinking about other mods. I have built 2 large modular synths and
> have plenty of experience with analog circuits, but this little
> bugger is a bit over my head. Here's what I want to do. I would
> like to locate a point in the circuit where I could insert switching
> jacks that would tap into each of the poly 800's dcos separately.
> That way I would have 8(?) jacks on the back of the unit, each one
> corresponding to a voice. I would want to get these jacks in BEFORE
> the filter in the circuit. I just want the raw DCOs so I can run
> each dco into a separate filter in my modular. Can this be done?
> Any ideas?
> _rob Currier