Hi,
Ok, I understood that I have the older revision of Monopoly, that;s why I do not have the KLM398.
Today I opened the case as promised, with care.
You can see the picture:
http://tinypic.com/r/v3oq4i/5Of course I can only replace the 4066 chips which both are socketed.
The second one is under the cable.
Is the TL072CP under the capacitors (inside the circle) ?
Portamento works perfect to the other VCOs and can be adjusted from 1 to 10. Only in VCO4 it is always on and cannot be adjusted.
Do you suggest to replace the TL072 or I may have a damaged 4006 ?
Second question. As VC04 is also detuned about 4 notes and I do not have the KLM398, which are the switches for the 4rth VCO that I have to tune ? I show two white circle tuners under the fourth VCO (check my uploaded picture).
--- In korg_mono-poly@yahoogroups.com, Florian Anwander <fanwander@...> wrote:
>
> Hello
>
> the old version of the MonoPoly did not have the KLM398. Also I don't
> understand what for you are looking at the 398. You have to change the
> IC10 on KLM354.
>
> Florian
>
> dir_marillion wrote:
> > Sorry to correct my previous post.
> > I mean where is the board KLM-398 to my board ?
> > According the picture I sent in my first post, it is not where it should be.
> >
> > --- In korg_mono-poly@yahoogroups.com, "dir_marillion"<dir_marillion@> wrote:
> >>
> >> Hi,
> >> I did not understand if Alan meant that I can use the TL072CP or not or I have to buy another chips which are only TL072 and not CP.
> >>
> >> I will open the Mono/Poly tomorrow and will see what I can do. Then I will let you know. If it is in a very complicated place I will not do it. If I am lucky enough and the chip is already plugged to a stand, I will replace it immediately :-)
> >>
> >> Really, where is the pcb KLM-354 to my revision board ? (check the picture I linked on my first post).
> >>
> >> Alan and Florian, I really appreciate your effort to help me.
> >>
> >> --- In korg_mono-poly@yahoogroups.com, Florian Anwander<fanwander@> wrote:
> >>>
> >>> Hi
> >>>
> >>> Florian Anwander wrote:
> >>>> [everything Alan has written already...]
> >>> Sorry, I had not seen, that Alan wrote everything already. I dod not
> >>> want to double it.
> >>>
> >>> Florian
> >>>
> >>
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>